We always strive for transparency, even if it means sharing a few design secrets.  Below are product drawings to help give you further insight into our equipment.

• Cable Pin Out 1.0 – A drawing that shows pinouts for standard cable assemblies.  Connector and cable part numbers are also shown.
• Dog Drawing 1.0 – A dimensioned drawing of the low-profile track dog.
• Double Down Sheave Drawing 1.0 – A dimensioned drawing of the double-down sheave.
• Double Up Sheave Drawing 1.0 – A dimensioned drawing of the double-up sheave.
• Flat Mule Sheave Drawing 1.0 – A dimensioned drawing of the flat mule sheave.
• Motor Tuning Flowchart 1.0 – Image of the motor tuning flowchart from the Spikemark manual.
• Pushstick Drawing 1.0 – A dimensioned drawing of the Pushstick winch.
• Revolver Drawing 1.0 – A dimensioned drawing of the Revolver turntable machine.
• Curtain Call Drawing – A dimensioned drawing of the Curtain Call Machine.
• Track Box Drawing 1.0 – A dimensioned drawing showing typical construction techniques for a winch deck.
• Turnaround Sheave Drawing 1.0 – A dimensioned drawing of the turnaround sheave.
• Trickline Drawing 1.0 – A dimensioned drawing of the Trickline linear actuator.